Florida licenses construction contractors at the state level through the Construction Industry Licensing Board (CILB), part of the Department of Business and Professional Regulation (DBPR). The rules are in Part I of Chapter 489, Florida Statutes. Every state license is either certified or registered, and that one word tells you where the contractor is allowed to work.
Certified: statewide
A certified contractor holds a certificate of competency issued by DBPR and "shall be allowed to contract in any jurisdiction in the state without being required to fulfill the competency requirements of that jurisdiction" (s. 489.105(8)). To get there, a person passes the board's state exam (s. 489.113(1)). The CILB's FAQ says applicants also need four years of field experience in the category, one of them supervisory, and must meet financial stability requirements (CILB FAQs).
When a certified contractor works in a new county, it only has to show the local building official its current certificate and pay the business tax and permit fees other people pay (s. 489.113(4)(a)).
Registered: local only
A registered contractor "has registered with the department pursuant to fulfilling the competency requirements in the jurisdiction for which the registration is issued," and may contract only there (s. 489.105(10)). In practice, the contractor earned a local certificate of competency from a county or city and then registered it with the state. No state exam is required for registration (s. 489.117(1)(a)), and the registration covers only the type of work and the places where the contractor met local licensing requirements (s. 489.117(1)(b)).
For you, the practical question is simple: if the license starts with R, confirm the registration covers your county or city.
After a declared emergency
Following a natural disaster, a registered contractor may work outside its home area within the emergency area, but only for work covered by its registration. That permission ends 24 months after the state of emergency expires (s. 489.117(5)). See unlicensed contracting after a hurricane for the other storm-season rules.
The license categories
Section 489.105(3) splits contractors into two divisions. The division matters for the recovery fund, which pays different caps for each.
Division I (paragraphs (a) to (c)):
| Category | DBPR code | Scope, in short |
|---|---|---|
| General contractor | CG / RG | Unlimited as to type of work |
| Building contractor | CB / RB | Commercial and residential buildings up to three stories, or non-structural remodeling of any size building |
| Residential contractor | CR / RR | One-, two- and three-family homes up to two habitable stories above no more than one uninhabitable story, plus accessory structures |
Division II (paragraphs (d) to (q)) covers trade contractors: sheet metal, roofing, Class A, B and C air-conditioning, mechanical, commercial pool/spa, residential pool/spa, swimming pool/spa servicing, plumbing, underground utility and excavation, solar, pollutant storage systems, and specialty contractors (s. 489.105(3)). DBPR's license types page lists the two-letter codes, for example CC/RC for roofing, CA/RA for air-conditioning, CF/RF for plumbing and CM/RM for mechanical.
Electrical and alarm contractors are licensed separately under Part II of Chapter 489. See Florida electrical contractor licensing.
Trade work a general contractor must subcontract
A contractor must subcontract all electrical, mechanical, plumbing, roofing, sheet metal, swimming pool and air-conditioning work unless it holds a state certificate or registration in that trade (s. 489.113(3)). There are narrow exceptions. A general, building or residential contractor need not subcontract wood shingle, shake, or asphalt or fiberglass shingle roofing on a new building it is constructing itself (s. 489.113(3)(b)). A general, building or residential contractor certified after 1973 may not advertise as a roofing contractor unless it is also certified or registered as one (s. 489.113(3)(g)).
Specialty licenses
The board sets specialty categories by rule, and a certified specialty category "exists as a voluntary statewide licensing category and does not create a mandatory licensing requirement" (s. 489.113(6)(a)). The statute directed the board to create voluntary specialty categories by July 1, 2025, including window and door installation, structural aluminum or screen enclosures, and marine seawall and dock work (s. 489.113(6)(b)). Confirm with DBPR which of those rules are in effect.
How to check a license
- Open DBPR's license search and search by name or license number.
- Confirm the status is current and active. A person working on an inactive or suspended license "is considered unlicensed" (s. 489.127(1)).
- Match the category to your job. A residential contractor can't build a four-story building; a roofing contractor can't move a bearing wall.
- For an R license, confirm the registration covers your county or city.
- Make sure the business on your contract is the one qualified by that license. A business organization needs a qualifying agent (s. 489.119).
Florida requires the contractor's certification or registration number on every offer of services, bid, contract and advertisement (s. 489.119(5)(b)), so you should never have to ask for it.
A city or county business tax receipt is not a contractor license. Section 489.127(1) says so in those words.
Related pages
- The full Florida licensing guide
- Jobs that don't need a state license
- Hiring checklist for Florida homeowners
- Licensing and permits topics
Sources
- s. 489.105, F.S.: definitions, divisions and categories (2026 Florida Statutes)
- s. 489.113, F.S.: qualifications, subcontracting, specialty categories
- s. 489.117, F.S.: registration
- s. 489.119, F.S.: business organizations, license numbers in ads and contracts
- s. 489.127, F.S.: prohibitions
- DBPR Construction Industry license types and CILB FAQs
Frequently Asked Questions
What is the difference between a certified and a registered contractor in Florida?
A certified contractor holds a certificate of competency from DBPR and may contract in any jurisdiction in the state without meeting local competency rules (s. 489.105(8), F.S.). A registered contractor registered with the state after meeting a local jurisdiction's competency requirements, and may contract only in those jurisdictions (s. 489.105(10), F.S.).
What do the letters in a Florida contractor license number mean?
DBPR lists two-letter codes for each category. For example, CG and RG are general contractors, CB and RB building contractors, CR and RR residential contractors, and CC and RC roofing contractors. The C prefix marks a certified (statewide) license and the R prefix a registered (local) license.
Can a registered contractor work outside its home county after a hurricane?
Yes, for a limited time. In an area under a state of emergency declared for a natural emergency, a registered contractor may do work covered by its registration. The authorization ends 24 months after the declared emergency expires (s. 489.117(5), F.S.).
Is a city business tax receipt the same as a contractor license?
No. Section 489.127(1), F.S., says a business tax receipt issued under chapter 205 is not a license for purposes of Florida's contractor law.